Grinding
Prediction of the Hardened Layer in Traverse Cylindrical Grinding-Hardening Download »
T. Nguyen, L.C. Zhang?. Materials Science Forum Vols. 697-698 (2012) pp 13-18
Surface integrity of materials induced by grinding
LC Zhang, Surface integrity of materials induced by grinding, Chapter 5, in: Machining with Abrasives, edited by MJ Jackson, Springer (2011) pp.245-267 (ISBN: 978-1-4419-7301-6).
A Note on Two Cooling Methods in Surface GrindingDownload »
Thai Nguyen1, Liangchi Zhang. A Note on Two Cooling Methods in Surface Grinding. Advanced Materials Research 328-330 (2011) pp 5-8
Estimating the peak indentation force of the edge chipping of rocks using single point-attack pick Download »
RH Bao, LC Zhang, QY Yao and J Lunn, Rock Mechanics and Rock Engineering, 44 (2011) 339-347
Heat Transfer in Grinding-Hardening of a Cylindrical Component Download »
Thai Nguyen, Liang Chi Zhang1, Dale Sun. Advanced Materials Research Vol. 325 (2011) pp 35-41?
Realisation of grinding-hardening in workpieces of curved surfaces - Part 1: plunge cylindrical grinding Download »
T Nguyen and LC Zhang, International Journal of Machine Tools and Manufacture, 51 (2011) 309-319.
Grinding-hardening using dry air and liquid nitrogen: prediction and verification of temperature fields and hardened layer thickness Download »
T Nguyen, LC Zhang, , International Journal of Machine Tools and Manufacture, 50 (2010) 901-910.
Performance of a new segmented grinding wheel system Download »
T Nguyen, LC Zhang, International Journal of Machining Tools and Manufacture, 49 (2009) 291-296.
Microstructural changes in silicon caused by indentation and machining
LC Zhang, Chapter 4, in: Semiconductor Machining on the Micro-Nanoscale, edited by JW Yan and J Patten, Research Signpost, India (2008) pp.155-197 (9788178953044)
Grinding force modelling: combining dimensional analysis with response surface methodologyDownload »
M Alauddin, LC Zhang and MSJ Hashmi, International Journal of Manufacturing Technology and Management, 12 (2007) 299-310.
Grinding-hardening with liquid nitrogen: mechanisms and technology Download »
T Nguyen, LC Zhang and I Zarudi, International Journal of Machine Tools and Manufacture, 47 (2007) 97-106
Nano-characterisation of materials: silicon, copper, carbon nanotubes and diamond thin films
LC Zhang, Chapter 8, in: Handbook of Theoretical and Computational Nanotechnology, Volume 8: Functional Nanomaterials, Nanoparticles, and Polymer Design,edited by M Rieth and W Schommers, American Scientific Publishers, Stevenson Ranch, California, USA (2006) pp. 395-456 (ISBN: 1588830500)
The coolant penetration in grinding with segmented wheels - Part 2: Quantitative analysis Download »
T Nguyen and LC Zhang, International Journal of Machine Tools and Manufacture, 46 (2006) 114-121.
The effect of compressed cold air and vegetable oil on the subsurface residual stress of ground tool steel Download »
KQ Xiao and LC Zhang, Journal of Materials Processing Technology 178 (2006) 9-13.
Modelling of the mist formation in a segmented grinding wheel system Download »
T Nguyen and LC Zhang,International Journal of Machine Tools and Manufacture, 45 (2005) 21-28.
The coolant penetration in grinding with segmented wheels - Part 1: Mechanism and comparison with conventional wheels Download »
T Nguyen and LC Zhang, International Journal of Machine Tools and Manufacture, 45 (2005) 1412-1420.
A fuzzy model for predicting burns in surface grinding of steel Download »
Y Ali and LC Zhang, International Journal of Machine Tools and Manufacture, 44 (2004) 563-571.
Some observations in grinding unidirectional carbon fibre-reinforced plastics Download »
NS Hu and LC Zhang, Journal of Materials Processing Technology, 152 (2004) 333-338.
A study on the grindability of multidirectional carbon fibre-reinforced plastics Download »
NS Hu and LC Zhang, Journal of Materials Processing Technology, 140 (2003) 152-156.
An assessment of the applicability of cold air and oil mist in surface grinding Download »
T Nguyen and LC Zhang, Journal of Materials Processing Technology, 140 (2003) 224-230.
A revisit to some fundamental wheel-workpiece interaction problems in surface grinding DownloadI Zarudi and LC Zhang, International Journal of Machine Tools and Manufacture, 42 (2002) 905-913.
Mechanical property improvement of quenchable steel by grinding Download »
I Zarudi and LC Zhang, Journal of Materials Science, 37 (2002) 3935-3943.
Modelling the structure changes in quenchable steel subjected to grinding Download »
I Zarudi and LC Zhang, Journal of Materials Science, 37 (2002) 4333-4341.
Difference in Subsurface Damage in Indented Specimens with and without Bonding Layers Download »
H Helbawi, LC Zhang and I Zarudi, International Journal of Mechanical Science, 43 (2001) 1107-1121.
Grinding of ceramics: strength, surface features and grinding conditions Download »
T Liu, B Latella and LC Zhang, Key Engineering Materials, 196 (2001) 43-60.
Towards a Deeper Understanding of Plastic Deformation in Mono-Crystalline Silicon Download »
LC Zhang, I Zarudi, International Journal of Mechanical Science, 43(9) (2001) 1985-1996.
A Numerical Algorithm for the Full Coupling of Mechanical Deformation, Thermal Deformation and Phase Transformation in Surface Grinding Download »
M Mahdi and LC Zhang, invited by Computational Mechanics, 26 (2000) 157-165.
On the Limit of Surface Integrity of Alumina by Ductile-Mode Grinding Download »
I Zarudi and LC Zhang, Trans ASME, Journal of Engineering Materials and Technology, 122 (2000) 129-134.
Applied Mechanics in Grinding, Part VII: Residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation Download »
M Mahdi and LC Zhang,International Journal of Machine Tools & Manufacture, 39 (1999) 1285-1298.
Initiation of dislocation systems in alumina in single-point grinding Download »
I Zarudi and LC Zhang, Journal of Materials Research, 14 (1999) 1430-1436.
Residual Stresses in Ground Components Caused by coupled thermal and mechanical plastic deformation Download »
M Mahdi and LC Zhang, Journal of Materials Processing Technology, 95 (1999) 238-245.
Surface roughness prediction of ground components using a fuzzy logic approach Download »
Y Ali and LC Zhang, Journal of Materials Processing Technology, 89-90 (1999) 561-568.
Applied Mechanics in Grinding: Part VI, residual stresses and surface hardening by coupled thermo-plasticity and phase transformation Download »
M Mahdi and LC Zhang, International Journal of Machine Tools Manufacture, 38 (1998) 1289-1340.
Effect of ultra-precision grinding on the microstructural change in silicon monocrystals Download »
I Zarudi and LC Zhang, Journal of Materials Processing Technology, 84 (1998) 148-158.
Subsurface structure of alumina associated with single-point scratching Download »
I Zarudi, LC Zhang and D Cockayne, Journal of Materials Science, 33 (1998) 1639-1654.
Applied Mechanics in Grinding, Part V: Thermal residual stresses Download »
M Mahdi and LC Zhang, International Journal of Machine Tools Manufacture, 37 (5) (1997) 619-633.
Estimation of surface residual stresses induced by creep-feed grinding using a fuzzy logic approach Download »
YM Ali and LC Zhang, Journal of Materials Processing Technology, 63 (1997) 875-880.
Subsurface damage in alumina induced by single point scratching Download »
I Zarudi, LC Zhang and Y W Mai, Journal of Materials Science, 31 (1996) 905-914.
Subsurface damage in single-crystal silicon due to grinding and polishing Download »
I Zarudi and LC Zhang, Journal of Materials Science Letters, 15 (1996) 586-587.
A study of creep-feed grinding of metallic and ceramic materials Download »
LC Zhang, T Suto, H Noguchi and T Waida, Journal of Materials Processing Technology, 48 [1-4] (1995) 267-274.
Applied mechanics in grinding, Part IV: The mechanism of grinding induced phase transformation Download »
LC Zhang and M Mahdi, International Journal of Machine Tools and Manufacture, 35 (1995) 1397-1409.
The finite element thermal analysis of grinding processes by ADINA Download »
M Mahdi and LC Zhang, Computers & Structures, 56 [2/3] (1995) 313-320.
Further remarks on the modelling of elastic modulus of grinding wheels Download »
G Lu and LC Zhang,International Journal of Machine Tools and Manufacture, 34 (1994) 841-846.
Grindability of some metallic and ceramic materials in CFG regimes Download »
LC Zhang, International Journal of Machine Tools and Manufacture, 34 (1994) 1045-1057.
Applied Mechanics in Grinding, Part II: Modelling of elastic modulus of wheels and interface forces Download »
LC Zhang, T Suto, H Noguchi and T Waida, International Journal of Machine Tools and Manufacture, 33 (1993) 245-255.
Applied Mechanics in Grinding, Part III: A new formula for contact length prediction and a comparison of available models Download »
LC Zhang, T Suto, H Noguchi and T Waida, International Journal of Machine Tools and Manufacture, 33 (1993) 587-597.
An overview of applied mechanics in grindingDownload »
LC Zhang, T Suto, H Noguchi and T Waida,Manufacturing Review, 5 (1992) 261-273.
